Hardware⏱️ 3 min read📅 2026-05-29

How to Fix: BSOD on connecting laptop to projector. PC won't boot now and no HDD/SD

Quick Answer: Try removing the projector and any other external devices, then boot in safe mode to isolate the issue. If it boots normally, the problem might be related to the projector or its connection.

📋 Table of Contents

  1. ⚠️ Common Causes
  2. 🛠️ Step-by-Step Verified Fixes
  3. 💡 Conclusion

The BSOD you're experiencing is likely due to a hardware issue caused by the laptop's inability to detect its storage devices (HDD/SDD) after connecting it to an external projector. This can happen when the system fails to properly recognize the connected device or when there is a conflict between the laptop and projector.

⚠️ Common Causes

  • Conflicting device settings between the laptop and projector.
  • Hardware failure in the storage devices or the laptop's motherboard.
  • BIOS settings not configured correctly for external devices.

🛠️ Step-by-Step Verified Fixes

Method 1: Boot in Safe Mode and Check Device Settings

  1. Step 1: Restart your laptop and immediately start pressing the F8 key repeatedly until you see the Advanced Boot Options menu.
  2. Step 2: Select Safe Mode with Networking from the menu and press Enter to boot into Safe Mode.
  3. Step 3: Check if your storage devices are detected in the Device Manager. If not, proceed to Method 2.

Method 2: Disable and Re-enable Storage Devices

  1. Step 1: Restart your laptop and immediately start pressing the F11 key repeatedly until you see the Boot Options menu.
  2. Step 2: Select UEFI Firmware Settings from the menu and navigate to the Advanced tab.
  3. Step 3: Disable any storage devices that are not needed or are causing conflicts. Then, enable them again and save the changes.

Method 3: Perform a System Restore

  1. Step 1: Create a system restore point from before the BSOD occurred.
  2. Step 2: Restart your laptop and immediately start pressing the F11 key repeatedly until you see the Boot Options menu.
  3. Step 3: Select System Restore from the menu, select the created restore point, and follow the on-screen instructions to complete the restore process.

💡 Conclusion

If none of these methods work, it may be a sign of a hardware failure that requires professional attention. However, by following these steps, you should be able to resolve the issue and get your laptop up and running again.

Did this fix your problem?

If not, try searching for specific error codes.

🔍 Search Error Database

❓ Frequently Asked Questions

🛠️ Related Fixes

How to Remove Virtual Network Adapter causing Hidden Network

Resolve hidden network issues by identifying and removing a problemati

SSD Not Showing Full Volume Space in Disk Management

Discover why your SSD's full volume space isn't showing up in Disk Man

How to Fix Lenovo LOQ Performance Issues

Resolve Lenovo LOQ performance issues by updating drivers, running a d